24KW Electric Steam Generator for Ironing and pressers

Therefore, no matter it is used in any environment, in order to ensure that the equipment will not cause problems during operation, it is necessary to regularly protect and maintain the equipment in daily use, and in order to avoid problems with the internal structure of the equipment, it is necessary to use the equipment when using the equipment. The following matters:
1. The safety valve of the electric heating steam generator shall be calibrated by the unit approved by the local labor safety supervision department, and shall be calibrated at least once a year.
2. In order to prevent the disc of the valve from sticking to the seat, a manual discharge test should be performed on the valve every week. It is strictly forbidden to use any means to increase the set pressure of the valve to make the valve invalid.
3. When the water pump is working or restarted after a long-term shutdown, use a screwdriver to move the fan blades on the motor surface through the hole in the fan cover until the pump works flexibly, then unscrew the air bolt (watering plug), and tighten the watering plug after the water is full. Jogging the water pump to fill water, sewage discharge can delay the generation of scale and accumulation on the furnace wall, and can extend the life of the electric heating steam boiler, at least once a day, and must be fully discharged after the operation is completed.
Nobeth Steam Generator is a manufacturer of independent research and development and production of steam generators. It has been deeply involved in the field of steam generators for 24 years and has created ingenious products with military technology, whether it is in food processing, experimental research, biopharmaceutical and other industries, or in high temperature It has a wide range of uses in cleaning, constant temperature maintenance, etc.!