head_banner

6kw Electric Steam Generator in High Temperature Washing

Short Description:

Exploring the complex structural composition inside an electrically heated steam generator


Electric heating steam generator is composed of water supply system, automatic control system, furnace and heating system and safety protection system. The electric heating steam generator is through a set of automatic control device. In order for the equipment to give full play to its functions, the structure of the equipment can fully reflect its characteristics. In order to have a deeper understanding of the equipment,


Product Detail

Product Tags

let’s take a look at the structural characteristics of the electric heating steam generator:
1. Sewage discharge valve: installed at the bottom of the equipment, it can completely remove the dirt in it, and discharge sewage at a pressure of no more than 0.1MPa.
2. Heating tube: The electric heating tube is the heating device of the electric heating steam generator. It heats the water into steam within a specified time through heat energy conversion. Since the heating part of the heating tube is completely immersed in the water, the thermal efficiency is particularly high. .
3. Water pump: The water pump belongs to the water supply device. It can automatically replenish water when the equipment is short of water or there is no water. There are two check valves behind the water pump, mainly to control the return of water. The main reason for the return of hot water is the check valve. If it fails, the check valve should be replaced in time, otherwise the boiling water will damage the sealing ring of the water pump and cause the water pump to leak.
4. Control box: The controller is located on the circuit board, and the control panel is on the right side of the steam generator, which is the heart of the steam generator. It has the following functions: automatic water inlet, automatic heating, automatic protection, low water level alarm, overpressure Protection, leakage protection function.
5. Pressure controller: It is a pressure signal, which is converted into an electrical switch signal electromechanical conversion device. Its function is to output switch signals under different pressures. The factory has adjusted the pressure to an appropriate pressure before leaving the factory.
The intelligence of the electric heating steam generator makes it easy to operate, and its high efficiency also attracts the love of many users, so it has many applications in many industries. For the efficient operation of the equipment, it is not only reflected in the operation of the equipment, but also regular Maintenance is also essential.

GH steam generator04 GH_01(1) GH_04(1) details How company introduction02 partner02 excibition


  • Previous:
  • Next:

  • Write your message here and send it to us