During the maintenance process of PC components, heat will be generated inside, so that the internal temperature will be too high and the internal structure will be damaged, so that the overall strength will not meet the requirements, and 3mm-1cm cracks will easily appear on the surface, making the actual strength of the PC board low. dizayn gücündə. Buna görə fərqli PC komponentlərini müalicə etmək fərqli temperatur tələb edir. The PC component maintenance steam generator can be adjusted in multiple gears according to the actual situation to provide the temperature required for PC component maintenance.
When the PC component maintenance steam generator is used to maintain the PC component, the curing temperature of the PC component is kept between 5C-25℃, and the curing humidity is greater than 90%. After the maintenance of PC components is completed and before leaving the warehouse, the temperature needs to be adjusted to the temperature difference with the outside temperature. Adətən temperatur fərqi 20 ° C-dən azdır və temperatur tənzimləmə sürəti 10c / saatdan azdır. Bu şəkildə, PC komponentlərində çatlaq ehtimalı təsirli şəkildə azaldıla bilər.
Prefabricated structures that can be hardened in a week or even half a month at room temperature can be demoulded after 24 hours of steam curing, and some can be demoulded in a few hours, which greatly shortens the curing time and speeds up the template turnover rate. Məhsuldarlığın artması.
PC-built steam generator steam maintenance can be used for bridge building maintenance, bridge road maintenance, railway maintenance, concrete pier maintenance, concrete curing kiln, concrete curing pool, heating and humidification curing, concrete steam curing, concrete insulation, steam curing room, Beam factory steam curing, box girder steam curing, T beam curing, mixer, mixing station, cement plant, railway maintenance, hollow brick maintenance, craft stone maintenance, artificial marble maintenance, heating and humidification təmir və s.
Time: Sep-01-2023
