Electric Steam Generator
-
60kw Electric Steam Generator for bakery
When baking bread, the bakery can set the temperature based on the size and shape of the dough. Temperature is even more important for bread toasting. How do I keep the temperature of my bread oven within range? At this time, an electric heating steam generator is needed. The electric steam generator emits steam in 30 seconds, which can continuously control the temperature of the oven.
Steam can gelatinize the skin of bread dough. During gelatinization, the skin of the dough becomes elastic and tough. When the bread encounters cold air after baking, the skin will shrink, forming a crunchy texture.
After the bread dough is steamed, the surface humidity changes, which can prolong the drying time of the skin, keep the dough from deforming, prolong the expansion time of the dough, and the volume of the baked bread will increase and expand.
The temperature of water vapor is greater than 100°C, spraying on the surface of the dough can transfer heat to the dough.
Good bread making requires controlled steam introduction. The entire baking process does not use steam. Usually only in the first few minutes of the bake phase. The amount of steam is more or less, the time is long or short, and the temperature is high or low. Adjust according to the actual situation. Tengyang bread baking electric steam generator has fast gas production speed and high thermal efficiency. The power can be adjusted in four levels, and the power can be adjusted according to the demand of steam volume. It controls the amount of steam and temperature well, making it great for bread baking. -
360kw Electric Steam Generator
Common faults and solutions of electric heating steam generator:
1. The generator cannot generate steam. Cause: The switch fuse is broken; the heat pipe is burned; the contactor does not work; the control board is faulty. Solution: Replace the fuse of the corresponding current; Replace the heat pipe; Replace the contactor; Repair or replace the control board. According to our maintenance experience, the most common faulty components on the control board are two triodes and two relays, and their sockets are in poor contact. In addition, various switches on the operation panel are also prone to failure.2. The water pump does not supply water. Reasons: the fuse is broken; the water pump motor is burned; the contactor does not work; the control board is faulty; some parts of the water pump are damaged. Solution: replace the fuse; repair or replace the motor; replace the contactor; replace damaged parts.
3. The water level control is abnormal. Reasons: electrode fouling; control board failure; intermediate relay failure. Solution: remove the electrode dirt; repair or replace the control board components; replace the intermediate relay.
4. The pressure deviates from the given pressure range. Reason: deviation of pressure relay; failure of pressure relay. Solution: readjust the given pressure of the pressure switch; replace the pressure switch.
-
54kw Electric Steam Generator
How to use, Maintenance and Repair of Electric Heating Steam Generator
In order to ensure the normal and safe operation of the generator and prolong the service life of the equipment, the following rules of use should be observed:1. The medium water should be clean, non-corrosive and impurity-free.
Generally, soft water after water treatment or water filtered by a filter tank is used.2. In order to ensure that the safety valve is in good condition, the safety valve should be artificially exhausted 3 to 5 times before the end of each shift; if the safety valve is found to be lagging or stuck, the safety valve must be repaired or replaced before it can be put into operation again.
3. The electrodes of the water level controller should be cleaned regularly to prevent the electric control failure caused by electrode fouling. Use a #00 abrasive cloth to remove any buildup from the electrodes. This work must be done with no steam pressure on the equipment and with the power cut off.
4. In order to ensure that there is no or little scaling in the cylinder, the cylinder must be cleaned once every shift.
5. In order to ensure the normal operation of the generator, it must be cleaned once every 300 hours of operation, including electrodes, heating elements, inner walls of cylinders, and various connectors.
6. In order to ensure the safe operation of the generator; the generator must be checked regularly. Regularly inspected items include water level controllers, circuits, the tightness of all valves and connecting pipes, the use and maintenance of various instruments, and their reliability. and precision. Pressure gauges, pressure relays and safety valves must be sent to the superior measurement department for calibration and sealing at least once a year before they can be used.
7. The generator should be inspected once a year, and the safety inspection should be reported to the local labor department and carried out under its supervision.
-
48kw Electric Steam Generator
The principle of electric heating steam generator
The working principle of the electric heating steam generator is: when the water supply system supplies water to the cylinder, when the water level rises to the working water level line, the electric heating element is powered on through the water level controller, and the electric heating element works. When the water level in the cylinder rises to a high water level, the water level controller controls the water supply system to stop supplying water to the cylinder. When the steam in the cylinder reaches the working pressure, the required pressure steam is obtained. When the steam pressure rises to the set value of the pressure relay, the pressure relay will act; cut off the power supply of the heating element, and the heating element will stop working. When the steam in the cylinder drops to the lower value set by the pressure relay, the pressure relay will act and the heating element will work again. In this way, an ideal, certain range of steam is obtained. When the water level in the cylinder drops to a low level due to evaporation, the machine can automatically cut off the power supply of the heating element to protect the heating element from being burned out. While cutting off the heating element power supply, the electric bell alarm sounds and the system stops working. -
2Ton gas steam boiler
What are the factors affecting the quality of steam generators
The gas steam generator that uses natural gas as the medium to heat the gas can complete high temperature and high pressure in a short time, the pressure is stable, no black smoke is emitted, and the operating cost is low. It has high efficiency, energy saving, intelligent control, convenient operation, safety and reliability, environmental protection, and Simple, easy maintenance and other advantages.
Gas generators are widely used in auxiliary food baking equipment, ironing equipment, special boilers, industrial boilers, clothing processing equipment, food and beverage processing equipment, etc., hotels, dormitories, school hot water supply, bridge and railway concrete maintenance, sauna, heat exchange Equipment, etc., the equipment adopts a vertical structure design, which is convenient to move, occupies a small area, and effectively saves space. In addition, the application of natural gas power has fully completed the policy of energy conservation and environmental protection, which meets the basic requirements of my country’s current industrial production and is also trustworthy. products, and get customer support.
Four elements that affect the steam quality of gas steam generators:
1. Pot water concentration: There are many air bubbles in the boiling water in the gas steam generator. With the increase of the pot water concentration, the thickness of the air bubbles becomes thicker and the effective space of the steam drum decreases. The flowing steam is easily brought out, which reduces the quality of the steam, and in severe cases, it will cause oily smoke and water, and a large amount of water will be brought out.
2. Gas steam generator load: If the gas steam generator load is increased, the rising speed of the steam in the steam drum will be accelerated, and there will be enough energy to bring highly dispersed water droplets out of the water surface, which will deteriorate the quality of the steam and even cause serious consequences. The co-evolution of water.
3. Gas steam generator water level: If the water level is too high, the steam space of the steam drum will be shortened, the amount of steam passing through the corresponding unit volume will increase, the steam flow rate will increase, and the free separation space of water droplets will be shortened, resulting in water droplets and steam together Going forward, the steam quality deteriorates.
4. Steam boiler pressure: When the pressure of the gas steam generator suddenly drops, add the same amount of steam and the amount of steam per unit volume, so that small water droplets will be easily taken out, which will affect the quality of the steam. -
12kw Electric Steam Generator
Applications:
Our boilers offer a diverse range of energy sources including waste heat and reduced running costs.
With clients ranging from hotels, restaurants, event providers, hospitals and prisons, a vast amount of linen is outsourced to laundries.
Steam boilers and generators for the steam, garment and dry cleaning industries.
Boilers are used to supply steam for commercial dry cleaning equipment, utility presses, form finishers, garment steamers, pressing irons, etc. Our boilers can be found in dry cleaning establishments, sample rooms, garment factories, and any facility that presses garments. We often work directly with equipment manufacturers to provide an OEM package.
Electric boilers make an ideal steam generator for garment steamers. They are small and require no venting. High pressure, dry steam is available directly to the garment steam board or pressing iron a quick, efficient operation. The saturated steam can be controlled as to pressure -
4KW electric steam boiler
Application:
Used in a range of applications from cleaning and sterilisation to steam sealing, our boilers are trusted by some biggest pharmaceutical manufacturers.
Steam is a vital part to the Pharma industry’s manufacturing. It offers huge savings potential for any pharmaceutical employing steam generation by reducing fuel costs.
Our solutions have been used globally within the laboratories and manufacturing facilities of numerous Pharmaceuticals. Steam offers an ideal solution to an industry that sustains utmost standards of manufacturing capabilities because of its flexible, reliable and sterile qualities.
-
6KW electric steam boiler
Features:
The product adopts high-quality universal casters and moves freely. The fastest heating in same power among all products. Use high quality high pressure vortex pump, low noise, not easy to damage; Simple overall structure, cost-effective, food production preferred.
-
3kw Electric Mini Steam Generator
Nobeth-F mainly composed of water supply, automatic control , heating, safety protection system and furnace liner.
Its basic working principle is to through a set of automatic control devices, and ensure the liquid controller( the probe or the floating ball) to control the opening and closing of the water pump, the length of water supply, and the heating time of the furnace during operation.
As the continous output with steam, the water level of the furnace keeps dropping. When it is at a low water level (mechanical type) or a middle water level (electronic type), the water pump automatically replenishes water, and when it reaches a high water level, the water pump stops replenishing water.Meantime, The electric heating tube in the tank continues to heat, and steam is continuously generated. The pointer pressure gauge on the panel or on the upper part of the top displays the value of the steam pressure timely. The whole process can be automatically displayed through the indicator light or the smart display. -
24kw electric steam generator
Features: NBS-AH Series is the first choice for packing Industry. Inspection-free products,multiple styles are aviliable.Probe version,float valve version,universal wheels version. The steam generator is made of high quality thickened plate with special spray painting.It is attractive and durable.The stainless steel water tank extends the service life.Separate cabinet is easy for maintenance.The high pressure pump can extract exhaust heat. Temperature,pressure,safety valve ensures tripple security.Four powers switchable and adjustable temperature and pressure.
-
9kw electric industrial steam generator
Features: The product is small in size, light in weight, with external water tank, which can be manually operated in two ways. When there is no tap water, the water can be manually applied. The three-pole electrode control automatically adds water to heat, the water and electricity independent box body, convenient maintenance. The imported pressure controller can adjust the pressure according to the need.
Applications: Our boilers offer a diverse range of energy sources including waste heat and reduced running costs.
With clients ranging from hotels, restaurants, event providers, hospitals and prisons, a vast amount of linen is outsourced to laundries.
Steam boilers and generators for the steam, garment and dry cleaning industries.
Boilers are used to supply steam for commercial dry cleaning equipment, utility presses, form finishers, garment steamers, pressing irons, etc. Our boilers can be found in dry cleaning establishments, sample rooms, garment factories, and any facility that presses garments. We often work directly with equipment manufacturers to provide an OEM package.
Electric boilers make an ideal steam generator for garment steamers. They are small and require no venting. High pressure, dry steam is available directly to the garment steam board or pressing iron a quick, efficient operation. The saturated steam can be controlled as to pressure.
-
12KW Electric Steam Generator For Clothing Ironing
Nobeth-FH mainly composed of water supply, automatic control , heating, safety protection system and furnace liner.
Its basic working principle is to through a set of automatic control devices, and ensure the liquid controller( the probe or the floating ball) to control the opening and closing of the water pump, the length of water supply, and the heating time of the furnace during operation.As the continous output with steam, the water level of the furnace keeps dropping. When it is at a low water level (mechanical type) or a middle water level (electronic type), the water pump automatically replenishes water, and when it reaches a high water level, the water pump stops replenishing water.Meantime, The electric heating tube in the tank continues to heat, and steam is continuously generated. The pointer pressure gauge on the panel or on the upper part of the top displays the value of the steam pressure timely. The whole process can be automatically displayed through the indicator light or the smart display.
