During the maintenance process of PC components, heat will be generated inside, so that the internal temperature will be too high and the internal structure will be damaged, so that the overall strength will not meet the requirements, and 3mm-1cm cracks will easily appear on the surface, making the actual strength of the PC board low. yn ûntwerpkrêft. Dêrom, genêzen fan ferskate PC-komponinten fereaskje ferskillende temperatueren. The PC component maintenance steam generator can be adjusted in multiple gears according to the actual situation to provide the temperature required for PC component maintenance.
When the PC component maintenance steam generator is used to maintain the PC component, the curing temperature of the PC component is kept between 5C-25℃, and the curing humidity is greater than 90%. After the maintenance of PC components is completed and before leaving the warehouse, the temperature needs to be adjusted to the temperature difference with the outside temperature. Meastentiids is it temperatuerferskil minder dan 20 ° C, en de temperatuerpassing-snelheid is minder dan 10C / H. Op dizze manier kinne de kâns op cracks yn PC-komponinten effektyf wurde fermindere.
Prefabricated structures that can be hardened in a week or even half a month at room temperature can be demoulded after 24 hours of steam curing, and some can be demoulded in a few hours, which greatly shortens the curing time and speeds up the template turnover rate. Ferhege produktiviteit.
PC-built steam generator steam maintenance can be used for bridge building maintenance, bridge road maintenance, railway maintenance, concrete pier maintenance, concrete curing kiln, concrete curing pool, heating and humidification curing, concrete steam curing, concrete insulation, steam curing room, Beam factory steam curing, box girder steam curing, T beam curing, mixer, mixing station, cement plant, railway Underhâld, holle bakstienûnderhâld, Craft Stone ûnderhâld, keunstmjittige marmeren ûnderhâld, ferwaarming en behâldend ûnderhâld, ensfh.
Posttiid: SEP-01-2023
