head_banner

Q:What should I do if the water tank of the steam generator leaks?

A:Generally speaking, if the water tank leaks, the one-way valve should be detected first, because during the use process, the water in the water tank suddenly increases and leaks out. When water is added in the body, the water-adding motor and the solenoid valve are opened simultaneously, and the water-adding voltage pressurizes the water in the water tank and enters into the furnace body, and the one-way valve is opened in the direction of adding water to the motor. After the water level in the furnace body reaches the standard, the water-adding motor and the solenoid valve are closed simultaneously, and the water in the furnace body starts to be heated and pressurized under the action of the heating furnace wire. At this time, if the one-way valve is opened in the opposite direction, the water in the furnace will flow back to the solenoid valve and the water-filling motor under the action of pressure, but the solenoid valve and the water-filling motor have no effect on preventing the water from flowing back, and the water in the furnace will flow back again. Back to the tank, leaking.

Sterilization and Drying with Steam
How to solve the water leakage of the steam generator water tank?
1. During maintenance, disassemble the one-way valve to see if there are particles in the valve that block its return, and it can still be used after tightening after cleaning.
2. You can use your mouth to blow on both sides of the one-way valve to see if it is damaged. If one side is open and the other side is blocked, it can be determined to be good. If both sides are connected, it means that it has been damaged and needs to be replaced. When replacing, be sure to pay attention to the direction of the one-way valve, and do not install it backwards.
The steam generator produced by Nobles uses inlet and outlet fittings, and the one-way valve has high closing performance, which can effectively avoid water leakage. The device can be started with one button, and it can generate a steady stream of steam within 5 minutes of operation. It is mainly used in food processing, building materials, medical chemicals, railway bridges, experimental research and other fields.


Post time: Aug-15-2023