A:The production quality of a gas boiler has a lot to do with its structure. Most gas boiler users now only focus on application effects and low cost, ignoring the essential quality of gas boiler equipment. For example, the welding seam is easy to break during the operation of the boiler, the boiler shell is easy to deform, and the boiler is difficult to repair after damage, all of which reflect the quality problems of the atmospheric pressure boiler.
How to eliminate the above shortcomings? This is the focus of both users and manufacturers. Improving the structure of atmospheric boilers is a specific measure to improve the quality of gas-fired boilers and increase their service life. It not only improves the external production quality, appearance quality and appearance color of the gas boiler, but also changes the essential quality of the atmospheric pressure boiler.
In addition, many gas-fired boilers have problems such as insufficient output, poor application effect or poor product quality. There are four root causes of insufficient yields or poor application results.
1 Vendors fill large companies with small products, which cannot meet the application load.
2 The structure is very unreasonable, it is difficult to clean the dust, and the dust accumulation blocks the flue, which seriously affects the boiler
3 Some parameters of the boiler, such as: grate area, furnace volume, flue, flue cross-sectional area, heating area, etc. do not meet the requirements, seriously affecting the use of the boiler.
4 The internal structure of the boiler has no allowance for thermal expansion and cold contraction, which is prone to weld cracks.
From the perspective of the structure of the gas boiler, the gas boiler must be inspected and maintained in accordance with the prescribed system. It is undeniable that a slight negligence can lead to a boiler explosion.
Post time: Jul-26-2023
